I’ve been a big fan of the Orbiter extruders (Massive shout out to Róbert Lőrincz for all his orbiter projects) for quite a while and I decided it was time to add filament runout sensors to all my printers. Quite frankly I was done with babysitting the end of a roll. The sensor is reallyContinue reading “Tutorial: Orbiter filament runout sensors on RatOS”
Tag Archives: Orbiter
Orbiter V2.0 on a Voron 0.1
Intro Recently I’ve had some horrible issues with inconsistent extrusion on my Voron 0.1. It all started after a hot end cooling fan failure and the subsequent rebuild of the mini afterburner. Anyway it was fortuitous timing in that I had just received an Orbiter V2.0 from LDO to review. That review will be comingContinue reading “Orbiter V2.0 on a Voron 0.1”
Triangle labs orbiter 1.5
When I started down the route of converting my custom built and badly aging coreXY into the RatRig VCore3 I aimed to re-use as much as possible from the original build. One of those parts was the extruder. I had a Mellow BMG wind which was giving me zero issues on the old printer andContinue reading “Triangle labs orbiter 1.5”
3DP and Me 