Tutorial: MKS Pi Klipper Install

The MKS Pi is Makerbase’s offering for users who can’t get hold of a Raspberry Pi but want to run Klipper! In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can beContinue reading “Tutorial: MKS Pi Klipper Install”

Tutorial: T95 Mini/Max TV Box Klipper Install

The T95 Mini is an android TV box. Be careful when sourcing one as there are a lot out there that actually use the H616 processor and currently the android tv boxes using this processor don’t have a stable OS image! There are also quite a few variants that do work but use a differentContinue reading “Tutorial: T95 Mini/Max TV Box Klipper Install”

Tutorial: Orange Pi PC Klipper Install

The Orange Pi PC is one of many open source single board computers (SBC) that have sprouted up over the last few years due to Raspberry Pi popularity and in more recent time shortages. The Orange Pi PC is very similar to the older RPi generation of boards but critically it is available and cheap.Continue reading “Tutorial: Orange Pi PC Klipper Install”

Tutorial: Banana Pi BPI-M1

The Banana Pi BPI-M1 is one of many open source single board computers (SBC) that have sprouted up over the last few years due to Raspberry Pi popularity and in more recent time shortages. The BPI-M1 isn’t a direct drop in replacement for the Raspberry Pi but it share sa similar form factor in termsContinue reading “Tutorial: Banana Pi BPI-M1”

Tutorial: Running Klipper on a Windows PC (Using WSL)

If you happened upon this article or series of articles from some point in the future you may wonder why I and many others invested so much time into finding ‘things’ that could run Klipper. Well remember that COVID thing? At this point in time most of the world is past the national lock downContinue reading “Tutorial: Running Klipper on a Windows PC (Using WSL)”

Tutorial: FYSETC Cheetah Mix + M10 Klipper Install

The FYSETC Cheetah Mix is one of the new generation of printer controller boards which look to integrate the single board computer (SBC) and into the printer controller board. The rise in popularity of Klipper and the fact RRF has also moved to a SBC + MCU architecture has meant that a few of theseContinue reading “Tutorial: FYSETC Cheetah Mix + M10 Klipper Install”

Tutorial: Banana Pi Zero M2 Klipper Install

The Banana Pi Zero M2 is one of many open source single board computers (SBC) that have sprouted up over the last few years due to Raspberry Pi popularity and in more recent time shortages. The Banana Pi M2 isn’t a direct clone of the Pi Zero as it uses a different form factor andContinue reading “Tutorial: Banana Pi Zero M2 Klipper Install”

Tutorial: Mellow Fly Pi Klipper Install

The Mellow Fly Pi is one of many single board computers (SBC) that have sprouted up over in recent time due to Raspberry Pi shortages. Mellow was one of the first 3d printer control board manufacturers to spot this trend and launched the Fly Gemini. This combined the SBC and printer controller (MCU) onto oneContinue reading “Tutorial: Mellow Fly Pi Klipper Install”

Tutorial: Orange Pi Zero Plus Klipper Install

The Orange Pi Zero Plus is one of many open source single board computers (SBC) that have sprouted up over the last few years due to Raspberry Pi popularity and in more recent time shortages. The Orange Pi Zero isn’t a direct clone of the Pi Zero as it uses a different form factor andContinue reading “Tutorial: Orange Pi Zero Plus Klipper Install”